What is quartz? Engineered stone explained
Quartz worktops are engineered stone: mostly natural quartz, bound and pressed into slabs. What it is, how it's made, and what that means in a kitchen.
In UK kitchens, quartz means engineered stone: a slab made mostly from crushed natural quartz, bound with resin and pressed under vacuum. It takes one of the hardest common minerals and turns it into a surface with the look of natural stone and far more predictable behaviour.
What it's made of
By weight, engineered quartz is typically 90 to 93% quartz grit and powder, with around 7 to 10% resin binding it together. Pigments set the background colour and draw the veining, which is how a quartz slab can recreate the look of a marble or a quartzite.
It goes by several names: engineered stone, engineered quartz, quartz surfaces, agglomerated stone in European standards, or simply quartz. They all describe the same material.
How it's made
The quartz and resin are mixed, spread into a slab mould and pressed under vacuum while the press vibrates. Taking the air out is what leaves the finished slab with virtually no pores. The slab is then cured, calibrated to an even thickness and polished. The method was developed in Italy by Breton, whose machinery is still used across the industry.
What that means in a kitchen
- No sealing. With virtually no pores, liquids can't soak in, so quartz never needs sealing.
- Hard-wearing. Quartz sits at about 7 on the Mohs hardness scale, against about 3 for marble, so it stands up well to daily use.
- Consistent. Every slab of a design is made the same way, so colour and veining match far more closely from slab to slab than quarried stone. That matters across a long run of worktops or a large island.
- Not heatproof. Quartz is unaffected below about 150°C, but the resin can mark under a very hot pan. Use a trivet.
- Indoors only. The resin isn't fully UV-stable, so long exposure to direct sunlight can discolour it.
Quartz and quartzite aren't the same
Quartzite is a natural rock, quarried in blocks, and most quartzite still benefits from sealing. Quartz is engineered and never needs it. For the full comparison, read Quartz, marble or quartzite.
How it's cut and fitted
Your fabricator templates your kitchen, then cuts, edges and polishes the slab to fit. Cutting engineered stone creates fine dust, so it's cut wet, in line with HSE guidance. Once it's fitted, a quartz worktop just needs a wipe with warm soapy water. Our care guide has the details.
Choosing a quartz
The difference between quartz designs is in the detail: how natural the veining looks, the depth in the background, and how the pattern carries across a full slab. We choose every design in our range for how closely it reads as natural stone. See the range, or ask for free samples to see them in your own light.
Questions
What is a quartz worktop made of?
A quartz worktop is engineered stone: typically 90 to 93% crushed natural quartz by weight, bound with resin and coloured with pigments, then pressed into slabs under vacuum. Aurore Stone's designs use it to recreate the look of marble and quartzite in a surface that never needs sealing.
Is quartz the same as engineered stone?
Yes. In UK kitchens, quartz, engineered quartz, engineered stone and quartz surfaces all mean the same material: natural quartz bound with resin into slabs. It is different from quartzite, which is a natural rock quarried in blocks.
Is quartz a natural stone?
Mostly, but not entirely. Around 90% of it is natural quartz, but it's crushed, bound with resin and pressed into slabs, so it's classed as engineered stone. That's what makes it consistent from slab to slab and non-porous, so it never needs sealing.
Is quartz hard-wearing?
Yes. Quartz is about 7 on the Mohs hardness scale, compared with about 3 for marble, so it stands up well in a busy kitchen. It isn't heatproof, though: use a trivet for hot pans, because the resin can mark above about 150°C.



